F4 NOXE V1 (Upgraded) Flight Controller + BL32 25A 4in1 BLHeli_32 ESC (DShot1200 / 2-4S / 20x20mm) [RCX08-413] Review - USD37.99 : AMPModel.COM : Upgraded Firmware: betaflight_4.1.0_FLYWOOF411.hex 1.6mm Thickness PCB Add 8V 3A dependent BEC The black box is upgraded to 16MB Add IIC (SDA, SCL) Port Add CURT (current signal) input port Remove PPM Port Support 2-6S Lipo input Specification (Flight Controller) Item Name: Betaflight F4 Flight Controller Model: F4 Nox4 V1 Version: Standard Version / Deluxe Version Standard Version: Without Barometer and Blackbox Deluxe Version: With Barometer and Blackbox CPU: STM32F411C MPU: MPU6000 Input Voltage: Support 2-6S Lipo Input Firmware: betaflight_4.1.0_FLYWOOF411.hex Built-In Betaflight OSD Built-in 5V@2.5A & 8V@3A BEC Support Spektrum 1024 /2048 , SBUS, IBUS, PPM, and 3.3V Spektrum Satellite receiver Size: 27x27mm Mounting Hole: 20x20mm , M2.5 Weight: 4.3g Application: for less than 150mm frame kit Specification (ESC) Used 32bit ARM Cortex MCU STM32F051 48MHZ CPU, 2048 Freq Support Dshot1200/600/300/150, Oneshot125, Multishot, PWM Voltage: 2-4S (7.4-16.8V) Continuous Current: 25A Peak Current: 30A (5 Sec) Firmware: BLHELI 32 ESC Mounting: 20*20MM Size: 29*31MM (Included soldering pads) Hole: 2MM Weight: 5g Diagram Picture Instruction GND: Ground 4.5V: Receiver power supply +5V: BEC 5V 2.5A cont. 8V: BEC 8V 3A cont. 3.3V: LDO3.3V,MAX.150MA VBAT+: share Lipo power 7.4V-26V(2-6S) PWM1,PWM2,PWM3,PWM4: ESC Signal VOUT: Video output for video Transmitter VIN: Camera Video input BUZ+ BUZ-: General active 5V buzzer for dbuz 5V LED: LED_Strip WS2812 LED signal RX1 & TX1: UART1 RX2 & TX2: UART2 RX2(DSM/IBUS): DSM2/DSMX/IBUS RC Receive(Software Settings RX2) SBUS: SBUS RC Receive (Software Settings RX2) RSSI:Receiver signal strength CAM-C: Camera control CURT:Current signal input SDA & SCL:IIC Package Included 1 x F4 Noxe V1 Flight Controller 1 x BL32 25A 4in1 BLHeli

F4 NOXE V1 (Upgraded) Flight Controller + BL32 25A 4in1 BLHeli_32 ESC (DShot1200 / 2-4S / 20x20mm)

Details

Manufacturer:	RCXHOBBY.COM
Model:	RCX08-413
Weight:	30g
Availability:	Usually ship within 48 hours (Estimated)
Price:	USD37.99

More Details | Video Proof of Working

Upgraded

Firmware: betaflight_4.1.0_FLYWOOF411.hex
1.6mm Thickness PCB
Add 8V 3A dependent BEC
The black box is upgraded to 16MB
Add IIC (SDA, SCL) Port
Add CURT (current signal) input port
Remove PPM Port
Support 2-6S Lipo input

Specification (Flight Controller)

Item Name: Betaflight F4 Flight Controller
Model: F4 Nox4 V1
Version: Standard Version / Deluxe Version
Standard Version: Without Barometer and Blackbox
Deluxe Version: With Barometer and Blackbox
CPU: STM32F411C
MPU: MPU6000
Input Voltage: Support 2-6S Lipo Input
Firmware: betaflight_4.1.0_FLYWOOF411.hex
Built-In Betaflight OSD
Built-in 5V@2.5A & 8V@3A BEC
Support Spektrum 1024 /2048 , SBUS, IBUS, PPM, and 3.3V Spektrum Satellite receiver
Size: 27x27mm
Mounting Hole: 20x20mm , M2.5
Weight: 4.3g
Application: for less than 150mm frame kit

Specification (ESC)

Used 32bit ARM Cortex MCU STM32F051 48MHZ CPU, 2048 Freq
Support Dshot1200/600/300/150, Oneshot125, Multishot, PWM
Voltage: 2-4S (7.4-16.8V)
Continuous Current: 25A
Peak Current: 30A (5 Sec)
Firmware: BLHELI 32 ESC
Mounting: 20*20MM
Size: 29*31MM (Included soldering pads)
Hole: 2MM
Weight: 5g

Diagram Picture Instruction

GND: Ground
4.5V: Receiver power supply
+5V: BEC 5V 2.5A cont.
8V: BEC 8V 3A cont.
3.3V: LDO3.3V,MAX.150MA
VBAT+: share Lipo power 7.4V-26V(2-6S)
PWM1,PWM2,PWM3,PWM4: ESC Signal
VOUT: Video output for video Transmitter
VIN: Camera Video input
BUZ+ BUZ-: General active 5V buzzer for dbuz 5V
LED: LED_Strip WS2812 LED signal
RX1 & TX1: UART1
RX2 & TX2: UART2
RX2(DSM/IBUS): DSM2/DSMX/IBUS RC Receive(Software Settings RX2)
SBUS: SBUS RC Receive (Software Settings RX2)
RSSI:Receiver signal strength
CAM-C: Camera control
CURT:Current signal input
SDA & SCL:IIC

Package Included

1 x F4 Noxe V1 Flight Controller
1 x BL32 25A 4in1 BLHeli_32 DShot1200 ESC (RCX07-761)
1 x Cable

More Images

This product was added to our catalog on Monday 25 January, 2021.
** product specification may vary from time to time and photo(s) is for illustration only